Damascus Steel Hunting Knife – Rosewood & Olive Wood Handle | DXH 1105

Salient Features

• Hand-Forged Damascus Steel Blade – 400+ layers of 1095 & 15N20 high-carbon steel, oil-quenched and heat-treated to ~58–60 HRC for long-lasting sharpness in the field.
• True Skinner / Hunting Geometry – 4" drop-point skinner blade with a generous belly for clean, controlled cuts when gutting, caping, and processing game.
• Full-Tang, Field-Ready Strength – One solid piece of steel from tip to pommel for durability, balance, and confident use on real hunts—not just display.
• Squared 90° Spine – Crisp spine edge suitable for striking a ferro rod, scraping bark, or applying controlled thumb pressure in bushcraft and survival tasks.
• Premium Rosewood & Olive Wood Handle – Hand-contoured mixed-wood handle provides a warm, secure grip that naturally locks into your palm, even in cold or wet conditions.
• Hand-Stitched Leather Sheath – Belt-carry sheath with secure snap closure keeps the knife protected and ready at your hip for quick access.

Performance Damascus You Can Trust in the Field

This isn’t a decorative “Damascus-look” etching. The DXH 1105 blade is forged from 400+ alternating layers of 1095 and 15N20 high-carbon steel, then oil-quenched and heat-treated to approximately 58–60 HRC.

• The ladder-pattern Damascus gives each blade a unique, rippling grain.
• High-carbon content supports outstanding edge retention and bite when cutting hide, meat, and rope.
• The full-tang construction carries that steel through the entire handle, so the knife feels solid and dependable under pressure.

It’s a compact knife, but it’s built like a tool—not a toy.

Curious about the origins and structure of Damascus steel? Know here what Damascus Steel is.

True Skinner Geometry for Clean, Controlled Work

The drop-point skinner profile is purpose-built for hunting:

• A short 4" blade gives you precise control inside the cavity.
• The deep belly improves slicing efficiency when skinning and caping.
• The fine tip lets you ease around joints and delicate areas without punching through hide.

Add the squared 90° spine, and you get more than just a hunting knife. That crisp spine can:

• Strike a ferro rod for fire starting,
• Scrape bark or tinder,
• Provide a secure thumb rest when you need extra pressure.

A Handle That Feels Like It Was Made for Your Hand

The handle is where a lot of knives fail. DXH 1105 is different.

The rosewood + olive wood handle is:

• Hand-contoured with a subtle palm swell for a locked-in grip.
• Warm and tactile, even in cold or damp weather.
• Naturally varied in grain and color, so each handle is visually unique.

Over time, the wood develops a patina that tells the story of the hunts and trips you’ve taken. It’s a knife that doesn’t just work well—it becomes yours.

Leather Sheath – Built for the Belt, Not the Drawer

Every DXH 1105 comes with a hand-stitched leather belt sheath:

• Secure snap closure keeps the knife protected.
• Belt loop keeps the blade at your side, not buried in a pack.
• Heavy stitching and reinforced leather are made for actual carry, not just presentation.

Dimensions & Specifications

• Total Length: ~8.75" (approx. 22.2 cm)
• Blade Length: ~4" (approx. 10.1 cm)
• Handle Length: ~4.75" (approx. 12 cm)
• Blade Steel: 1095 / 15N20 high-carbon Damascus, 400+ layers
• Hardness: ~58–60 HRC (heat-treated & oil-quenched)
• Knife Type: Fixed-blade hunting / skinner knife
• Blade Style: Drop-point skinner
• Damascus Pattern: Ladder-pattern Damascus
• Tang: Full tang
• Spine: Squared 90° spine suitable for ferro-rod striking & scraping
• Handle Material: Rosewood & olive wood, hand-finished
• Sheath: Hand-stitched premium leather belt sheath

SKU: DXH 1105

Ideal For

• Deer, hog, and small-game hunters wanting a precise skinner
• Bushcraft and survival enthusiasts needing a compact, fire-capable tool
• Collectors of hand-forged Damascus knives with authentic materials and origin
• Gift buyers looking for a meaningful, heirloom-worthy hunting knife

The Package Includes:

1. 1 x DXH 1105 - a hand-forged skinner hunting knife
2. 1 x Custom made premium hand-stitched leather belt sheath.

Damascus steel rewards a bit of simple care

• Use these items appropriately. Avoid using them as a pry bar, can opener, etc.
• Hand-wash only with mild soap – never put Damascus in the dishwasher.
• Dry immediately after use to prevent moisture damage - including around the guard and handle. Pay attention to the spine and edge.
• While not in use, keep items clean and dry to prevent contamination & rust.
• Apply a light coat of oil (mineral oil, gun oil, or dedicated blade oil) before storage especially in humid climates or if the knife won’t be used for a while. It will help prevent contamination & rust.
• For long-term storage, keep the knife in a dry place and out of the sheath or ensure the sheath is fully dry.
• Surface rust can be wiped off with a vinegar and lime mixture, followed by recoating with oil for long-lasting rust prevention.
• Do not scrub with steel wool; wipe and rub in the direction of Damascus patterns for cleaning.
• Sharpen on quality stones or a guided system and hone regularly to maintain a keen edge.

Follow this routine, and your DXH 1105 will stay sharp, rust-resistant, and visually striking season after season.

Craft Story & Heritage

DXH 1105 is forged in Wazirabad, Pakistan, a region long recognized for its cutlery and blade-making tradition. Here, bladesmithing is still treated as a craft, not an assembly line.

Each knife is:

• Hand-forged and ground by experienced craftsmen,
• Individually etched to reveal its ladder-pattern Damascus,
• Hand-fitted to its rosewood and olive wood handle, and
• Paired with a custom leather sheath.

Because every step involves real hands and real tools, no two knives are ever perfectly identical. Your DXH 1105 will have its own pattern, its own grain, and its own character—something you simply don’t get with mass-produced blades.

Whether you’re buying it as your dedicated skinner, your camp companion, or as a gift for a hunter who appreciates real steel, DXH 1105 delivers both performance and pride of ownership.

Frequently Asked Questions

Q1: Is DXH 1105 suitable for heavy field use or just display?

A: DXH 1105 is a true working knife. The 400+ layer Damascus steel, full-tang construction, and skinner profile are chosen for real hunting tasks like gutting, skinning, and light camp chores. It looks collectible, but it’s designed to be used.

Q2: How does the Damascus steel hold up outdoors?

A: The blade combines 1095 and 15N20 high-carbon steels, heat-treated and oil-quenched for edge retention and toughness. Like any high-carbon Damascus, it should be cleaned, dried, and lightly oiled after use to prevent rust and keep the pattern crisp.

Q3: What kind of cutting tasks is this knife best at?

A: DXH 1105 excels at hunting and field work—skinning, caping, joint work, cutting cordage, and finer camp tasks. The short, curved blade gives you excellent control where a longer knife might feel clumsy.

Q4: What does the ladder-pattern Damascus mean?

A: Ladder-pattern Damascus is created by forging and grinding layers of steel into a repeating “rung” pattern. It’s more labor-intensive than simple etching and gives each blade a unique, three-dimensional grain that serious knife buyers look for.

Q5: Can I use the spine to strike a ferro rod?

A: Yes. DXH 1105 has a squared 90° spine that can be used to strike a ferro rod, scrape bark, or apply firm thumb pressure—useful for survival and bushcraft situations.

Q6: Are these knives mass-produced?

A: No. DXH 1105 is forged in small batches by skilled bladesmiths in Wazirabad. Each knife is hand-ground, hand-fitted, and hand-finished, which is why pattern, grain, and handle tone will vary from piece to piece.

Custom-Made to Perform

Each Foladify blade is hand-forged by experienced craftsmen using time-tested techniques. Damascus patterns, handle materials, and dimensions may vary slightly from piece to piece — a hallmark of genuine handmade work.

Every item is inspected before shipping to ensure fit, finish, and performance meet our standards.